BrMSX 2.0
Copyright (C) 1997-1999 by Ricardo Bittencourt

Usage: BRMSX [-options] [cartA.rom] [cartB.rom]

Options:
-msx1          select MSX-1 emulation (default)
-msx2          select MSX-2 emulation
-normal        normal emulation speed (default)
-fast          fast emulation speed
-turbo         turbo emulation speed
-ifreq <n>     change interrupt frequency (default is 60)
-roma <n>      select MegaROM Mapper for cartridge A (default=autodetect)
-romb <n>      select MegaROM Mapper for cartridge B
               0=Generic MegaROM with SCC
               1=MSX-DOS 2
               2=Konami with SCC
               3=Konami without SCC
               4=ASCII 8kb
               5=ASCII 16kb
               6=ASCII 8kb with 8kb SRAM
               7=ASCII 16kb with 2kb SRAM
               8=Panasonic FM-PAC with 8kb SRAM
               9=Konami with 8-bit DAC
Press enter to continue.
-ramslot <n>   select slot of RAM, can be 2 (default) or 3
-korean        enable korean memory layout (require korean MSX.ROM/MSXHAN.ROM)
-megaram <n>   select size of MegaRAM (default=1)
               0=128kb 1=256kb 2=512kb 3=1Mb 4=2Mb
-mapper <n>    select size of Memory Mapper (default=1)
               0=64kb 1=128kb 2=256kb 3=512kb 4=1Mb 5=2Mb 6=4Mb
-res <mode>    select screen resolution
               0 =320x200x8  MSX-1 default
               1 =256x200x8  MSX-1 large screen
               2 =512x384x8  MSX-1 TV emulation (interpolation+scanlines)
               3 =256x192x8  MSX-1 square pixels
               6 =512x384x15 MSX-1 Parrot engine
               7 =320x200x8  MSX-2 default
               8 =512x384x8  MSX-2 full width support
               9 =512x384x8  MSX-2 full width support with black scanlines
               11=640x480x8  MSX-2 full screen support with black scanlines
-vsync         enable vertical retrace synchronization
-green         enable green monitor emulation
-frame <n>     frame skipping (1 means all frames rendered, default)
-allspr        disable 5th sprite ocultation
-nosprcol      disable sprite collision detection
-vdptiming     enable emulation of VDP timing
-nocache       disable video cache
-nommx         disable MMX optimizations
Press enter to continue.
-cpugraph      enable CPU performance graph
-psggraph      enable PSG graph
-nosound       disable the sound engine
-scc           enable SCC sound
-fmpac         enable FM-PAC sound (MSX Music)
-sr <n>        select the sample rate (default is 45455)
-speaker       sound through the PC speaker
-speaq <n>     select quality for PC speaker sound (range is 1 to 9)
-dos2          enable MSX-DOS 2 emulation (require DOS2.ROM)
-diska <file>  use <file> as drive A
-disklow       low-level, port-based disk emulation (default)
-diskhigh      high-level, patch-based disk emulation
-mount <dir>   mount the directory <dir> as drive A:
-tape <file>   use <file> as cassete image
-prn <file>    load <file> to make symbolic debugging
-joy           enable joystick emulation
-joysens <n>   adjust joystick sensibility (range is 0 to 7, default is 3)
-snespad       enable SNES pad connected in LPT1
-fakejoy       make the keyboard act as joystick A
-autofire      enable the automatic fire
-autorun       enable the automatic run
-autospeed <n> adjust speed for autofire (range is 0 to 9, default is 5)
-nomouse       disable mouse driver detection
-com <port>    select COM serial port [1-4]
Press enter to continue.
-client        computer is client
-server        computer is server
-novesa        disable VESA detection
-noled         disable LED emulation
-nopentium     disable pentium extensions and cpu autodetect
-noenter       disable enter pressing at start
-help          show this help page
